Experimental determination of the induced activity in activation detectors of a complex geometric shape

The paper presents the results of experimental determination of the induced activity in copper-/aluminum-based activation detectors when irradiated with neutrons with energies of about 14 MeV. The activation detectors were square-shaped metal plates with a thickness from 1.0 to 1.5 mm and a side size about 5.0 cm. These dimensions significantly exceed those of the detectors that are used in the research of high-intensity neutron fluxes. The detectors described in this work can be used for studying low-intensity neutron fluxes (with a flux density of up to 10 6 n/cm 2 ∙s). It is shown that, when working with such detectors, it is possible to apply the usual methods for calculating the induced activity in thin activation detectors, with corrections that take into account the emerging features of the ‘neutron source - activation detector’ and ‘activation detector - secondary radiation detector’ geometries. The effects of absorption of primary and secondary radiation by the detector substance are also revealed. The Geant4 tools were used for calculating the geometric factors and theoretical induced activity. The study confirms the applicability of such activation detectors for solving the problem of determining the yield of neutrons with energies of about 14 MeV from a neutron generator target. The results of the experiments coincide, within the margin of error, with the results of simulations performed using the Geant4 tools.