MODELING OF THE MECHANISM OF ACTION OF EPILAME FILM IN THE PROCESS OF PROCESSING

The article discusses the mechanism of action of the epilam film during the operation of epilated drills and the influence of cutting conditions, processing conditions on their condition. Tribological tests were carried out using a special installation, where the test conditions are close to the con...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Advanced Engineering Letters 2022-03, Vol.1 (1), p.8-15
Hauptverfasser:	Zvyagina, Elena, Selemenev, Mikhail, Frolenkova, Larisa, Kravchenko, Igor, Kuznetsov, Yury, Velichko, Sergey, Ašonja, Aleksandar, Kalashnikova, Larisa
Format:	Artikel
Sprache:	eng
Schlagworte:	cutting lubricant epilam films friction coefficient temperature tribological tests
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Beschreibung
Zusammenfassung:	The article discusses the mechanism of action of the epilam film during the operation of epilated drills and the influence of cutting conditions, processing conditions on their condition. Tribological tests were carried out using a special installation, where the test conditions are close to the conditions characteristic of the drilling process. Based on the results of the experiment, it was found that the effectiveness of epilam film directly depends on the cutting speed, which determines the temperature in the contact zone. Research has shown that use of oil-based LCTF MR-7 (МР-7) has the best effect on the state of epilam coating.
ISSN:	2812-9709 2812-9709
DOI:	10.46793/adeletters.2022.1.1.2