Performance Studies of High-Power Optical Parametric Oscillators Pumped by a Pulsed Fiber Laser
High-power optical parametric oscillators (OPOs), as mature radiation sources in mid-infrared (MIR), degenerate gradually with wavelength increase, mainly above 3700 nm. Using a periodically poled magnesium-oxide-doped lithium niobate (MgO:PPLN) as the nonlinear crystal, we build a high-power signal...
Gespeichert in:
Veröffentlicht in: | Applied sciences 2023-06, Vol.13 (13), p.7356 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | High-power optical parametric oscillators (OPOs), as mature radiation sources in mid-infrared (MIR), degenerate gradually with wavelength increase, mainly above 3700 nm. Using a periodically poled magnesium-oxide-doped lithium niobate (MgO:PPLN) as the nonlinear crystal, we build a high-power signal-resonant OPO pumped by ytterbium-doped fiber laser (YDFL). To improve the OPO’s output power at ~3.8 μm, the parameters, such as the pump beam’s waist diameter and location, the curvature radius of the output coupler and the length of MgO:PPLN, are discussed in detail. When pump power is 79 ± 4 W with a repetition rate of 200 kHz, the OPO provides up to 8 ± 0.4 W average power in beam quality with M2 factors of ~1.84 and ~1.69 in the two axes. Under the highest output power, the center wavelength of the idler beam is 3768.4 nm with a full-width at half-maximum (FWHM) bandwidth of ~18.6 nm. When the output power reaches ~6.3 W, its power stability is 1.6% root mean square (RMS) over 7 h. Further analysis of the factors affecting OPO’s performance and simple structure are critically essential for compact OPO prototypes with a capacity of high output power. |
---|---|
ISSN: | 2076-3417 2076-3417 |
DOI: | 10.3390/app13137356 |