Enhancing Thermo‐Osmotic Low‐Grade Heat Recovery by Applying a Negative Pressure to the Feed
A newly developed technology, thermo‐osmotic energy conversion (TOEC), is supposed to convert low‐grade heat into power. However, the performance of existing TOEC experiments is deficient. This paper discusses the feasibility of strengthening TOEC by applying negative pressure to the feed liquid, wh...
Gespeichert in:
Veröffentlicht in: | Global challenges 2023-04, Vol.7 (4), p.2200238-n/a |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | A newly developed technology, thermo‐osmotic energy conversion (TOEC), is supposed to convert low‐grade heat into power. However, the performance of existing TOEC experiments is deficient. This paper discusses the feasibility of strengthening TOEC by applying negative pressure to the feed liquid, which can reduce air pressure in the membrane pores and molecular diffusion resistance. Theoretical calculation shows that when the cooling and heating temperatures are 40 and 80 °C, respectively, and the transmembrane pressure difference is 5.0 MPa, the TOEC system with a negative pressure of 0.5 bar at the feed side can approach an efficiency of 3.01% and a power density of 16.85 W m−2, which increases by 20% and 27% compared with no negative pressure, respectively. Given the nonuniformity in the real system, computational fluid dynamics simulation is used to obtain the correction factor, which is then used to revise the theory prediction results for the first time. Moreover, a lab‐scale experiment also proves that a negative pressure at the feed benefits the performance of the TOEC device. Overall, this research presents a feasible method to enhance a TOEC system, which may promote the development of a more‐efficiently TOEC system for low‐grade heat utilization.
Thermo‐osmotic energy conversion is supposed to convert low‐grade heat into power. The efficiency can be improved by applying negative pressure to the feed liquid. The theoretical calculation, computational fluid dynamics simulation, and experiments are carried out to verify the method. |
---|---|
ISSN: | 2056-6646 2056-6646 |
DOI: | 10.1002/gch2.202200238 |