Automatic Calibration between Multi-Lines LiDAR and Visible Light Camera Based on Edge Refinement and Virtual Mask Matching

To assist in the implementation of a fine 3D terrain reconstruction of the scene in remote sensing applications, an automatic joint calibration method between light detection and ranging (LiDAR) and visible light camera based on edge points refinement and virtual mask matching is proposed in this paper. The proposed method is used to solve the problem of inaccurate edge estimation of LiDAR with different horizontal angle resolutions and low calibration efficiency. First, we design a novel calibration target, adding four hollow rectangles for fully automatic locating of the calibration target and increasing the number of corner points. Second, an edge refinement strategy based on background point clouds is proposed to estimate the target edge more accurately. Third, a two-step method of automatically matching between the calibration target in 3D point clouds and the 2D image is proposed. Through this method, i.e., locating firstly and then fine processing, corner points can be automatically obtained, which can greatly reduce the manual operation. Finally, a joint optimization equation is established to optimize the camera’s intrinsic and extrinsic parameters of LiDAR and camera. According to our experiments, we prove the accuracy and robustness of the proposed method through projection and data consistency verifications. The accuracy can be improved by at least 15.0% when testing on the comparable traditional methods. The final results verify that our method is applicable to LiDAR with large horizontal angle resolutions.