Study on Muck Pile Shape of Open-Pit Bench Blasting Based on PFC
To study the influence of different resistance lines and rows delay intervals on the shape of the muck pile and the throwing distance of open-pit bench blasting based on the open-pit bench blasting test, two-dimensional particle flow code (PFC2D) is used for numerical simulation. The experimental an...
Gespeichert in:
Veröffentlicht in: | Shock and vibration 2023-06, Vol.2023, p.1-10 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | To study the influence of different resistance lines and rows delay intervals on the shape of the muck pile and the throwing distance of open-pit bench blasting based on the open-pit bench blasting test, two-dimensional particle flow code (PFC2D) is used for numerical simulation. The experimental and simulation data were compared and analyzed, and the error value was acceptable. Meanwhile, different resistance lines and row delay intervals are used to conduct numerical simulation analysis. The results show that the height change of the muck pile is directly proportional to the resistance line, and the rock throwing distance is inversely proportional to the resistance line change. The best resistance line is 1.75 m in the actual working condition, according to the effect of the muck pile. By fitting the relationship between the resistance line and rock throwing distance and blasting muck pile’s height, it is found that the relationship is nonlinear. By simulating different row delays, the optimal row delay time difference in the bench blasting model is determined to be 25 ms under similar working conditions. It provides a guiding significance for the blasting parameter design under similar working conditions. |
---|---|
ISSN: | 1070-9622 1875-9203 |
DOI: | 10.1155/2023/2859668 |