Predictive model of back-wall overpressure behind a cantilever wall

To reduce the hazards posed by blast shock waves, important potential targets are usually shielded by cantilever walls. The main factor that indicates whether there is damage is the back-wall overpressure, and of concern here is predicting the back-wall overpressure behind a rigid cantilever wall. This was measured in full-scale blast experiments using 20 kg of trinitrotoluene (TNT) located on the ground, and the experimental data reveal how the cantilever wall mitigates the shock wave. A 3D numerical model was established to determine how the wall size influences the diffraction of the shock wave and the peaks and attenuation of the back-wall overpressure. Based on the numerical results and dimensional analysis, a model is proposed that provides an effective means of predicting the back-wall overpressure rapidly from the TNT equivalent, the standoff distance, and the height of the wall.