Influence of Sintering Temperature and ZrO2 Dopants on the Microstructure and Electrical Properties of Zinc Oxide Varistors

This paper investigated the effects of sintering temperature on the microstructure and electrical properties of ZrO 2 -doped zinc oxide (ZnO) varistor ceramics. The results show that, the additive ZrO 2 exists as independent second phase between ZnO grains, which can limit the growth of ZnO grains and improve the voltage gradient. With the increasing of ZrO 2 , the content of extrinsic elements (Mn, Sb, Co, Cr) in the grain boundary layers tends to increase first and then decease. When ZrO 2 content is more than 1.0mol%, the electrical performance of ZnO varistors decreases sharply. With the increasing of sintering temperature, the ZnO grain size increases and the voltage gradient decreases. When the sintering temperature is larger than 1200°C, more monoclinic ZrO 2 phase transformed into cubic phase, and more micropores are generated, causing the non-linear coefficient to decrease and the residual voltage ratio and leakage current to increase. With a sintering temperature of 1150°C and a ZrO 2 content of 1.0mol%, the ZnO varistors can reach the overall optimum electric performance, exhibiting a breakdown voltage of E_{\mathrm {1mA}}=420\text{V} /mm, a nonlinear coefficient of \alpha = 58 , a residual voltage ratio of C_{\mathrm {R}}= 1.87 , and a leakage current of I_{\mathrm {L}}= 4 ~\mu \text{A} . The studies in this paper can give reference for the development of high quality ZnO arresters.