Thermal performance assessment of cold chain chamber with vacuum insulation panel envelope layer

As one of the super thermal adiabatic materials nowadays, Vacuum Insulation Panel has slim thermal conductivity, which can be no more than 0.0040 W/(m·K) at an internal pressure of less than 10Pa. the excellent thermal performance makes it prosperous in cold chin experiments. Actually, Vacuum Insulation Panel is normally installed with other insulation materials as multilayer envelope in practice. However, influenced by the fluctuation of environmental factors and the difference of thermal & physical properties of materials, the overall thermal performance of multilayer insulation systems with Vacuum Insulation Panel different arrangement sequences is significantly various. A reasonable Vacuum Insulation Panel location plays an important role on the thermal performance. In this paper, the thermal insulation performance of multilayer under unsteady state condition was studied. Three chambers, with the same exterior size, that is, 300 × 300 × 300 mm3, were employed for the innovation purpose. The multi-layer insulation construction involves a 10 mm layer of Vacuum Insulation Panels and a 10 mm layer of polyurethane. And three different envelope structures, namely, internal insulation, sandwich insulation and external insulation were built according to the Vacuum Insulation Panel's location. The numerical heat transfer model and physical model were established. The simulative and experimental results were comprised and analyzed. The results implied that, to maintain the constant temperature in cold\hot chamber, the vacuum insulation panels are located on the face of temperature fluctuation side, i.e. the ambient side, and have a better overall insulation performance. [Display omitted] ●There type cold chain chambers with VIP were prepared under unsteady thermal transfer process.●Physic molds were built and simulation was done●Numerical and experimental any sis was taken.●The overall insulation performance is much better while the VIP layer was located on the side against temperature fluctuation.