Seismic Performance Enhancement of RC Columns Using Thin High-Strength RC Jackets and CFRP Jackets

The existing non-ductile RC structures built prior to the 1960s–1970s were mainly conceived to carry only vertical loads. As a result, the columns of these structures demonstrate poor overall hysteresis behavior during strong earthquakes, dominated by brittle shear or/and premature excessive slippin...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Fibers 2021-05, Vol.9 (5), p.29
Hauptverfasser: Kalogeropoulos, George, Tsonos, Alexander-Dimitrios
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The existing non-ductile RC structures built prior to the 1960s–1970s were mainly conceived to carry only vertical loads. As a result, the columns of these structures demonstrate poor overall hysteresis behavior during strong earthquakes, dominated by brittle shear or/and premature excessive slipping of the inadequately lap-spliced reinforcement. In the present study, the effectiveness of two different strengthening systems (including either the wrapping of the columns by carbon-fiber-reinforced polymer textile or the use of thin high-strength reinforced concrete jackets), was experimentally and analytically investigated. The main variables examined were the strengthening material, the length of the lap splices and the amount of confinement provided by the jackets. Three cantilever column specimens were constructed without incorporating modern design code requirements for preserving seismic safety and structural integrity. Subsequently, the specimens were strengthened and subjected to earthquake-type loading. Their hysteresis performances were compared, while also evaluated with respect to the response of two similar original specimens and the behavior of a control one with continuous reinforcement, tested in a previous study. The predictions of the proposed analytical formulation for the hysteresis behavior of the strengthened specimens were satisfactorily verified by the experimental results.
ISSN:2079-6439
2079-6439
DOI:10.3390/fib9050029