Influence of calcined mud on the mechanical properties and shrinkage of self-compacting concrete

The use of SCC has a particular interest in terms of sustainable development. Indeed, their specific formulation leads to a greater volume of dough than for common concretes, thus, a larger quantity of cement. However, for economical, ecological and technical reasons, it is sought to limit their cem...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:MATEC web of conferences 2018, Vol.149, p.1026
Hauptverfasser: Fatima, Taieb, Nadia, Belas, Omar, Belaribi, Khalil, Belguesmia, Rachid, Hadj Sadok
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The use of SCC has a particular interest in terms of sustainable development. Indeed, their specific formulation leads to a greater volume of dough than for common concretes, thus, a larger quantity of cement. However, for economical, ecological and technical reasons, it is sought to limit their cement content [1]. It is therefore necessary to almost always use mineral additions as a partial replacement for cement because the technology of self-compacting concretes can consume large quantities of fines, in this case calcinated mud issued from dams dredging sediments that can give and/or ameliorate characteristics and performances of this type of concretes. Four SCCs had been formulated from the same composition where the only percentage of calcinated mud of Chorfa (west of Algeria) dam changed (0%, 10%, 20% and 30%). The effect of calcinated mud on characteristics at fresh state of SCC according to AFGC was quantified. Mechanical strengths and shrinkage deformation (total, autogenous, drying) were evaluated. The results show the possibility to make SCCs with different dosages of calcinated mud having strengths that can defy those of the control SCC. The analysis of free deformations indicates the beneficial impact of the mud by contributing to decrease the amplitudes of the shrinkage compared to those of the control SCC. L’utilisation des BAP revêt un intérêt particulier en termes de développement durable. En effet, leur formulation spécifique conduit à un volume de pâte plus important que pour des bétons traditionnels et donc, a priori, à une plus grande quantité de ciment. Or, pour des raisons économiques et des considérations d’ordre écologiques et techniques, on cherche à limiter leur teneur en ciment [1]. Il est donc nécessaire d’utiliser quasi systématiquement des additions minérales en remplacement partiel au ciment car la technologie des bétons autoplaçants est capable de consommer d’énormes quantités de fines en l’occurrence la vase calcinée issue des sédiments de dragage des barrages, qui à son tour pourrait apporter et/ou améliorer des caractéristiques et performances de ce type de bétons. Quatre BAP ont été formulés à partir d’une même composition où seul le pourcentage de la vase calcinée issue des sédiments de dragage du barrage de Chorfa (ouest algérien) change (0%, 10%, 20% et 30%). L’effet de la vase sur les caractéristiques des BAP à l’état frais a été quantifié. Des résistances mécaniques et les déformations de retrait (total, endogène e
ISSN:2261-236X
2274-7214
2261-236X
DOI:10.1051/matecconf/201814901026