Evaluation of the Loading, Unloading, and Permanent Deformation of Newly Available Epoxy Resin Coated Ni-Ti Wires Using Self-Ligating Brackets

Aim. The purpose of this study was to evaluate the load and unload deflection and permanent deformation of round 0.016′′ and rectangular 0.016′′×0.022′′ regular and coated Ni-Ti wires. Materials and Methods. Ni-Ti archwires produced by two manufacturers were evaluated. Both regular and coated round and rectangular Ni-Ti wire segments (n=15) from each group were submitted to a three-point bending test. Both types of wires were evaluated for permanent deformation at the end of a recovery cycle. Results. The coated round 0.016′′ Ni-Ti wires produced a significantly lower force in loading (p