The Effect of WC/C Coating on the Wear of Bevel Gears Used in Coal Mines

There are many problems in the operation of spiral bevel gears; for example, difficult lubrication conditions lead to excessively high oil temperature and the risk of severe wear. Thus, the aim of this work was to check whether, by the deposition of a thin, hard, low-friction coating on the teeth flanks of spiral bevel gears, it is possible to improve the resistance to wear, reduce friction and possibly the gear vibrations. The tribological experiments were carried out in two phases. In the first phase, a bevel gear test rig was used (laboratory testing). In the second phase, a verification test was performed using an industrial gear stand (chain conveyor) working under conditions typical of coal mines. The above effects are accompanied at the first stages of the tests by an undesired, higher level of vibrations in case of the steel-WC/C material combination. Thus, the WC/C coating can be applied to increase the wear resistance and decrease the oil temperature in the transmissions containing spiral bevel gears in, e.g., chain conveyors installed in coal mines.