Utilizing X-ray Computed Tomography for Lithium Slag: A Guide to Analyzing Microstructure and Its Potential Influence on Liberation

Slag containing lithium aluminate is analyzed for its microstructure. This refers to the mineralogical composition, shape and size of the target and matrix phase, orientation of the target phase, and porosity. To investigate the microstructure of the target phase, a representative sample is taken from the block and measured using the XCT. With the help of the two- and three-dimensional analysis, an insight into the complex structure can be gained. The target phase, in this case, lithium aluminate, has a dendritic structure with different orientations and thus also influences the microstructure of the matrix phase. This is composed of a mix of several minerals and amorphous components. Fine pores with a radius of 10–100 µm are found throughout the sample volume. The fracture behavior of the slag is estimated on the basis of the influencing factors that can initiate fracture in brittle materials or divert the path of the fracture. Since the mineralogical and thus also mechanical properties of the slag can be influenced by its production process, suggestions are given as to how slags should be structured in order to ensure a non-random fracture, which is required for the efficient liberation of the target phase in mechanical processing.