Performance boost for bismuth telluride thermoelectric generator via barrier layer based on low Young’s modulus and particle sliding

The lack of desirable diffusion barrier layers currently prohibits the long-term stable service of bismuth telluride thermoelectric devices in low-grade waste heat recovery. Here we propose a new design principle of barrier layers beyond the thermal expansion matching criterion. A titanium barrier layer with loose structure is optimized, in which the low Young’s modulus and particle sliding synergistically alleviates interfacial stress, while the TiTe 2 reactant enables metallurgical bonding and ohmic contact between the barrier layer and the thermoelectric material, leading to a desirable interface characterized by high-thermostability, high-strength, and low-resistivity. Highly competitive conversion efficiency of 6.2% and power density of 0.51 W cm −2 are achieved for a module with leg length of 2 mm at the hot-side temperature of 523 K, and no degradation is observed following operation for 360 h, a record for stable service at this temperature, paving the way for its application in low-grade waste heat recovery. The lack of desirable barrier layers prohibits the power generation applications of bismuth telluride thermoelectric devices. Here, the authors construct a kind of Ti barrier layer with high strength and low resistivity with a module exhibiting high thermal stability during the service at 523 K.