Features of modeling the system of turbine unit with a variable contact zone of its stator parts

Modeling of stator parts of power units of thermal and nuclear power plants is carried out according to several standard schemes. Common methods of modeling systems with non-uniform and non-stationary contact of stator elements lead to significant errors in calculating the amplitudes of forced vibration displacement at a given external load. The object of this paper is to analyze errors in calculating the displacement amplitudes of forced oscillations in different modeling schemes according to the standard approach and developing a method for constructing a quasi-dynamic model taking into account the time-varying contact of the system’s stator parts as well as other factors. To do this, the author has developed a series of models with different degrees of sampling and considering different system factors. Particular attention is paid to the impact of factors arising from the long operation of the power plant (subsidence of foundation). The modeling was carried out taking into account the calculation method. The finite element method was used to perform calculations. The results of the calculation of forced oscillation displacement amplitudes are available to show the areas of application of different types of three-dimensional models of the steam power unit. The results of research conducted on the developed models show the impossibility of using standard simulation schemes for systems with a variable contact between its stator elements, as shown by the example of a power unit with steam turbine. The efficiency of using the models taking into account the variable contact between the stator parts and other factors to calculate the displacement amplitudes of the forced oscillations with high accuracy is likewise presented. Every specialist should be aware of the factors that influence the research results. This paper is concerned with assessment of the influence of a number of factors on the results of calculating the vibrations of a complex mechanical system. Article Highlights The basic (common) and five specific models of the turbine-foundation-base system are presented. Based on the results of calculations of forced vibrations, the credibility of each specific model is shown. The results of using the technique for modeling the optimal design scheme for turbines with a capacity of 300 MW are shown.