Simulation and Experimental Study of CO2 Transcritical Heat Pump System with Thermoelectric Subcooling

In order to improve the efficiency of the system and promote its application in other industries, the performance of a thermoelectric subcooled CO2 transcritical heat pump system was studied. A simulation model of the system was established using steady-state lumped parameter technology, and the experimental data were compared with the simulation results. The effects of cooling and chilled water flow rate and temperature, subcooling degree, compressor discharge pressure on the coefficient of performance (COP), and heating coefficient of performance (COPh) were analyzed. The results showed that COP/COPh increased with the increase in cooling and chilled water flow rate and chilled water temperature and decreased with the increase in cooling water temperature. The experimental COPh and COP of the system with a thermoelectric subcooler increased by 4.19% and 4.62%, respectively, compared to the system without it. The simulated data was in good agreement with the experimental data, and the error was within 10%, thus verifying the correctness of the model. When the subcooling degree increased to 11 °C, the system simulation results showed that COP/COPh increased by about 40% and 13.3%, respectively. The optimal high pressure was about 8.0 MPa, which corresponded to the maximum COP and COPh of the system of 3.25 and 4.25, respectively. The research results can provide a theoretical basis for future system optimization.