Research on Control System of Corn Planter Based on Radar Speed Measurement

The intelligent control of precision planting can detect and regulate the operation quality of the planter in real time, which plays an important role in improving the operation quality of the planter and the yield of the corn. In this paper, the control system of a corn precision planter is designed to realize the operating quality monitoring and electric driving of the seed-metering device. The planting quality is calculated by the time interval between the neighboring falling seeds, instead of the plant spacing, to improve the operational efficiency of the system. At the same time, the forward speed of the planter is obtained by radar, which is used to accurately match the speed of the seed-metering device with the forward speed of the planter. The velocity error of the radar is analyzed, and the relevant relationship of the radar output frequency and forward speed is established. Comparative test results of this system and the JPS-12 test bench show that the detection performance of the system is reliable, and the maximum detection error of the quality parameters is less than 2.88%. Field experiments were carried out to verify the operational performance of the control system. Two speed sensors, radar and GPS, were chosen to study the effect of speed measuring on the performance of the control system. We found that speed measuring has a significant effect on planting performance. The qualified parameters of radar were significantly higher than those of GPS, at a forward speed of 6–12 km/h. The qualification feeding index (QFI) of radar was 0.51%, 0.67%, and 2.05% higher than that of GPS at speeds of 6, 8, 10, and 12 km/h. The precision index (PREC) of radar was 17.60%, 5.44%, 16.81%, and 17.30% lower than that of GPS. Therefore, the control system based on the radar speed measurement developed in this paper can significantly improve the operating quality of the planter.