The Influence of Replacing Aggregates and Cement by LFS on the Corrosion of Steel Reinforcements

The aim of this study is to investigate the corrosion behavior of steel reinforcement embedded in mortar specimens in which both the aggregate and cement are partially replaced by ladle furnace slag (LFS) and different percentages of chloride ions by weight of cement are introduced into the mix at the time of kneading. The corrosion behavior was studied by using electrochemical techniques in order to evaluate the corrosion rate and the symptoms produced in steels of specimens with and without slag LFS. From the analysis of the results, it is concluded that the use of LFS in a partial replacement of aggregate and cement in mortar specimens does not compromise the behavior of the mortar with regard to corrosion of the steel reinforcement; consequently, partial replacement by LFS is fully feasible from this standpoint.