In Situ Stress Distribution of Deep Coals and Its Influence on Coalbed Methane Development in the Shizhuang Block, Qinshui Basin, China

The in situ stress plays a crucial role in variations in coal permeability, hydraulic fracturing behavior, and accordingly coalbed methane (CBM) productivity. As the depth increases, the effects of in situ stress will become more prominent. In the Shizhuang block, present-day stress magnitude and permeability of coals at depths >800 m were measured with multiple-cycle hydraulic fracturing and injection falloff test, respectively. The results show that most seams are under pressure reservoirs with pressure gradient 1200 m) with increasing depth. Strike-slip fault stress regimes are predominant, while seams with depth >1400 m are subjected to a normal fault stress regime. Coal permeability tends to decrease gradually with depth and tends to be convergence to 0.01 mD. Considering extremely low permeability of these deep seams, hydraulic fracturing must be applied to create seepage channels for gas and water drainage. Although the high horizontal stress difference in deep seams is favorable for the generation of longer and simple hydraulic fractures, there is no obvious relations between fracture length and gas productivity as poor-support fractures and limited sand migration distance. The current hydraulic fracturing missed the variable stress regimes and permeability at various depth, but used the similar fracturing schemes, leading to significant reduction in gas productivity with depth. Using the high viscosity fracturing fluid, great sand volume, big injection rate, and low sand concentration are recommended for hydraulic fracturing. Single-branch horizontal well with staged fracturing show better applicability for deep CBM extraction.