Creep and Hardening Characteristics of Anthracite under Graded Static–Dynamic Coupled Loading

Remaining coal pillars in remining areas exhibit clear creep characteristics, and dynamic pressure accelerates their instability and failure. The creep and hardening characteristics of coal under dynamic pressure are of great engineering significance for the stability of remaining coal pillars in re...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied sciences 2023-10, Vol.13 (19), p.10648
Hauptverfasser: Yue, Shaofei, Wang, Kai, Zhang, Xiaoqiang, Kang, Tianhe, Yan, Jianbing, Jiang, Yulong
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Remaining coal pillars in remining areas exhibit clear creep characteristics, and dynamic pressure accelerates their instability and failure. The creep and hardening characteristics of coal under dynamic pressure are of great engineering significance for the stability of remaining coal pillars in remining areas and their control. To investigate the creep and hardening characteristics of anthracite under static–dynamic coupled loading, graded loading creep tests with different loading rates were conducted. In this research, the creep strain, instantaneous elastic modulus, and creep rate of anthracite were studied under different graded loading rates. The results showed that the hardening effect of the samples manifested as an increasing instantaneous elastic modulus at the loading stage and a decreasing strain rate at the creep stage. When the graded loading rate increases from 0.01 to 0.1 mm/s, the instantaneous elastic modulus increases by 0.16–2.32 times. The sudden increase in the instantaneous elastic modulus at the failure stress level explains the instantaneous failure of the samples well. The actual yield levels corresponding to the peak instantaneous elastic modulus of the samples linearly decreased with increasing graded loading rate. The functional relationship between the graded loading rate and the elastic modulus hardening coefficient, the actual yield stress, and the strain rate decay coefficient were established, which could quantitatively describe the influence of different graded loading rates on the creep and hardening characteristics of anthracite and predict its creep damage.
ISSN:2076-3417
2076-3417
DOI:10.3390/app131910648