Effects of porcelain layer thickness and luting resin cement on the opalescence properties of porcelain veneers

When discolored teeth are repaired with porcelain veneers, the thickness of the restorations should be increased appropriately using opaque porcelain and bonded by applying opaque luting resin cement to cover discolored substrates. However, its impact on the opalescent performance has not been reported yet. To analyze the effects of opacity, body porcelain layer thickness, and luting resin cement on the opalescence properties of porcelain veneer restorations for discolored teeth. Ninety IPS d. SIGN A3 porcelain veneer specimens were prepared via powder-paste coating and sintering. Specimens were divided into three groups according to ceramic type and cement used or not: body porcelain group as control, body/opaque porcelain group and body/opaque porcelain-resin cement composite group. Each group was subdivided into three subgroups based on the thickness, 0.50, 0.75, and 1.00 mm (n = 10). Variolink N Bleach XL luting resin cement with thickness of 0.1 mm was applied to the bottoms of body/opaque porcelain specimens to produce body/opaque porcelain-resin cement composites. The opalescence (OP) values were calculated and the micromorphological characteristics were analyzed by scanning electron microscope (SEM). Statistical analysis was performed by using ANOVA test (P