Generation of a Layer of Severe Plastic Deformation near Friction Surfaces in Upsetting of Steel Specimens

Narrow layers of severe plastic deformation are often generated near frictional interfaces in deformation processes as a result of shear deformation caused by friction. This results in material behavior that is very different from that encountered in conventional tests. To develop models capable of...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Metals (Basel ) 2018-01, Vol.8 (1), p.71
Hauptverfasser: Alexandrov, Sergei, Šidjanin, Leposava, Vilotić, Dragiša, Movrin, Dejan, Lang, Lihui
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Narrow layers of severe plastic deformation are often generated near frictional interfaces in deformation processes as a result of shear deformation caused by friction. This results in material behavior that is very different from that encountered in conventional tests. To develop models capable of predicting the behavior of material near frictional surfaces, it is necessary to design and carry out tests that account for typical features of deformation processes in a narrow sub-surface layer. In the present paper, upsetting of steel specimens between conical and flat dies is used as such a test. The objective of the paper is to correlate the thickness of the layer of severe plastic deformation generated near the friction surface and the die angle using a new criterion for determining the boundary between the layer of severe plastic deformation and the bulk.
ISSN:2075-4701
2075-4701
DOI:10.3390/met8010071