Construction of the FH 150 Hydro-Geological Drilling Facility with Additive Manufactured Markers Through 3D Printing

Construction of the FH 150 Hydro-Geological Drilling Facility with Additive Manufactured Markers Through 3D Printing

The washing head is the most important sub-assembly in a water well drilling installation, and ensures the operation of the installation on the principle of "hydraulic rotary drilling with direct circulation of drilling fluid", whereby, inside the rotating drill rod assembly is injected, t...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:The Annals of "Dunărea de Jos" University of Galaţi. Fascicle IX, Metallurgy and Material Science (Online) Metallurgy and Material Science (Online), 2023-06, Vol.46 (2), p.23-27
Hauptverfasser: FICĂ, Sorin Alexandru, DIMITRESCU, Andrei, BABIȘ, Claudiu
Format: Artikel
Sprache:eng
Schlagworte:
3d printing
fh 150
fused deposition modeling
water drilling installation
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The washing head is the most important sub-assembly in a water well drilling installation, and ensures the operation of the installation on the principle of "hydraulic rotary drilling with direct circulation of drilling fluid", whereby, inside the rotating drill rod assembly is injected, through the washhead, drilling fluid from the discharge of the drilling mud pump, which is fed from a pit (pit) dug below ground level.
ISSN:2668-4748
2668-4756
DOI:10.35219/mms.2023.2.04