Simulation Analysis of Three-Point Bending Fracture Process of Yellow River Ice

During the ice flood period of the Yellow River, the fracture and destruction of river ice can easily lead to the formation of ice jams and ice dams in the curved and narrow reaches. However, the occurrence and development mechanism of river ice fracture remain incompletely understood in the Yellow River. Therefore, based on the three-point bending physical test of the Yellow River ice, a three-point bending fracture numerical model of the Yellow River ice was constructed. The fracture failure process of the Yellow River ice under three-point bending was simulated, and the effects of the crack-to-height ratio and ice grain size on the fracture properties of the river ice were analyzed. By comparing the results with those of physical tests on river ice, it is evident that the fracture model can effectively simulate the cracking process of river ice. Within the confines of the simulated sample size spectrum, as the crack-to-height ratio varies from 0.2 to 0.8, the fracture toughness value of the Yellow River ice spans a range from 115.01 to 143.37 KPa·m[sup.1/2] . Correspondingly, within the simulated calculation values ranging from 5.38 mm to 24.07 mm for ice crystal size, the fracture toughness value of the Yellow River ice exhibits a range from 116.89 to 143.37 KPa·m[sup.1/2] . The findings reveal that an increase in the crack-to-depth ratio leads to a decrement in the fracture toughness of river ice. Within the scale range encompassed by the model calculations, as the average size of the ice crystal grains augments, the fracture toughness of the river ice exhibits a gradual ascending trend. The research results provide a parameter basis for studying the fracture performance of the Yellow River ice using a numerical simulation method and lays a foundation for investigating the cracking process of river ice from macro and micro multi-scales.