Biosynthesis of CuFe2O4@Ag hybrid nanocomposite: Ultrasensitive detection and catalytic reduction of 4-nitrophenol

Due to the dearth of extremely capable, sensitive, and stable catalysts, the efficient detection and catalytic removal of 4-nitrophenol (4-NP) in industrial wastewater remains a serious challenge. The detection and determination of 4-nitrophenol (4-NP) presence in the environment is a matter of paramount importance because it is a high-priority hazardous pollutant that can affect people, animals, and plants. Here, we present a promising and economically viable green synthetic route for fabricating CuFe2O4 and CuFe2O4@Ag hybrid nanocomposites from the leaf extract of Senna didymobotrya. The UV–Vis, FTIR, XRD, FE-SEM, EDXA, BET and VSM analysis were performed to characterize the synthesis of CuFe2O4@Ag nanocomposite. To evaluate the electrocatalytic capacity of CuFe2O4@Ag, electrochemical sensing stratergy was performed with cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The modified CuFe2O4@Ag glassy carbon electrode (GCE) (CuFe2O4@Ag/GCE) demonstrated a linear response in the range of 0.01-15 μg/ml (71 nm-107 μM) and the ability to detect 4-NP at low concentration (0.006 μg/ml (43 nM)). Due to the increased surface area of CuFe2O4@Ag/GCE by ̴ 1.5-fold, a greater cathodic current response (-16 μA/cm2) at a low potential of -0.81 V was observed compared to CuFe2O4/GCE alone for the detection of 4-NP. Additonally, CuFe2O4@Ag showed excellent reduction ability towards 4-NP using NaBH4 with an efficiency of 96.4 % which was higher than the CuFe2O4 (only 87.3 %) in 12 min due to the synergistic relationship among Ag NPs and CuFe2O4 nanostructures. The outcomes from this study shows that the bi-functional electrocatalyst holds vast potential for environmental remediation. [Display omitted]