Nepal emission inventory – Part I: Technologies and combustion sources (NEEMI-Tech) for 2001–2016

The lack of a comprehensive, up-to-date emission inventory for the Himalayan region is a major challenge in understanding the extensive regional air pollution, including its causes, impacts and mitigation pathways. This study describes a high-resolution (1 km × 1 km) present-day emission inventory for Nepal, developed with a higher-tier approach. The complete study is divided into two parts; this paper covers technologies and combustion sources in residential, industrial, commercial, agricultural diesel-use and transport sectors as Part I (NEEMI-Tech), while emissions from the open burning of municipal waste and agricultural residue in fields and fugitive emissions from waste management, paddy fields, enteric fermentation and manure management for the period 2001–2016 will be covered in Part II (NEEMI-Open). The national total energy consumption (except hydropower, solar and wind energy) estimated in the base year 2011 was 374 PJ, with the residential sector being the largest energy consumer (79 %), followed by industry (11 %) and the transport sector (7 %). Biomass is the dominant energy source, contributing to 88 % of the national total energy consumption, while the rest is from fossil fuel. A total of 8.9 Tg of CO2, 110 Gg of CH4, 2.1 Gg of N2O, 64 Gg of NOx, 1714 Gg of CO, 407 Gg of NMVOCs, 195 Gg of PM2.5, 23 Gg of BC, 83 Gg of OC and 24 Gg of SO2 emissions were estimated in 2011 from the five energy-use sectors considered in NEEMI-Tech. The Nepal emission inventory provides, for the first time, temporal trends of fuel and energy consumption and associated emissions in Nepal for a long period, 2001–2016. The energy consumption showed an increase by a factor of 1.6 in 2016 compared to 2001, while the emissions of various species increased by a factor of 1.2–2.4. An assessment of the top polluting technologies shows particularly high emissions from traditional cookstoves and space-heating practices using biomass. In addition, high emissions were also computed from fixed-chimney Bull's trench kilns (FCBTKs) in brick production, cement kilns, two-wheeler gasoline vehicles, heavy-duty diesel freight vehicles and kerosene lamps. The monthly analysis shows December, January and February as periods of high PM2.5 emissions from the technology-based sources considered in this study. Once the full inventory including open burning and fugitive sources (Part II) is available, a more complete picture of the strength and temporal variability in the emissions and sou