A novel tilt sensor for studying ice deformation: application to streaming ice on Jarvis Glacier, Alaska

We developed a tilt sensor for studying ice deformation and installed our tilt sensor systems in two boreholes drilled close to the shear margin of Jarvis Glacier, Alaska to obtain kinematic measurements of streaming ice. We used the collected tilt data to calculate borehole deformation by tracking...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of glaciology 2020-02, Vol.66 (255), p.74-82
Hauptverfasser: Lee, Ian R., Hawley, Robert L., Bernsen, Steven, Campbell, Seth W., Clemens-Sewall, David, Gerbi, Christopher C., Hruby, Kate
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:We developed a tilt sensor for studying ice deformation and installed our tilt sensor systems in two boreholes drilled close to the shear margin of Jarvis Glacier, Alaska to obtain kinematic measurements of streaming ice. We used the collected tilt data to calculate borehole deformation by tracking the orientation of the sensors over time. The sensors' tilts generally trended down-glacier, with an element of cross-glacier flow in the borehole closer to the shear margin. We also evaluated our results against flow dynamic parameters derived from Glen's exponential flow law and explored the parameter space of the stress exponent n and enhancement factor E . Comparison with values from ice deformation experiments shows that the ice on Jarvis is characterized by higher n values than that is expected in regions of low stress, particularly at the shear margin (~3.4). The higher n values could be attributed to the observed high total strains coupled with potential dynamic recrystallization, causing anisotropic development and consequently sped up ice flow. Jarvis' n values place the creep regime of the ice between basal slip and dislocation creep. Tuning E towards a theoretical upper limit of 10 for anisotropic ice with single-maximum fabric reduces the n values by 0.2.
ISSN:0022-1430
1727-5652
DOI:10.1017/jog.2019.84