Experimental Determination of Influences of Static Eccentricities on the Structural Dynamic Behavior of a Permanent Magnet Synchronous Machine

In electrified vehicles, the masking noise behavior of internal combustion engines is absent, making the tonal excitation of the electric machine particularly noticeable in vehicle acoustics, which is perceived as disturbing by consumers. Due to manufacturing tolerances, the tonal NVH characteristics of the electric machine are significantly influenced at wide frequency ranges. This paper presents a systematic exploration of the influence of static eccentricity as one manufacturing tolerance on the NVH behavior of Permanent Magnet Synchronous Machines (PMSMs). The study utilizes a novel test bench setup enabling isolated variations in static eccentricity of up to 0.2 mm in one PMSM. Comparative analysis of acceleration signals reveals significant variations in the dominance of excitation orders with different eccentricity states, impacting critical operating points and dominant frequency rages of the electric machine. Despite experimentation, no linear correlation is observed between increased eccentricity and changes in acceleration behavior. Manufacturing eccentricity and deviations in rotor magnetization are discussed as potential contributors to the observed effects. The findings emphasize static eccentricity as a critical parameter in NVH optimization, particularly in electrified powertrains. However, the results indicate that further investigations are needed to explore the influence of eccentricities and magnetization deviations on NVH behavior comprehensively.