Technology and machine parameters for preparing the soil for sowing cotton

The study aims to justify the design scheme and main parameters of the combined aggregate for soil preparation for cotton sowing on ridges. The authors have developed the technology of soil preparation for cotton sowing on ridges and the aggregate for its implementation. The technology and design scheme of the developed aggregate are presented. The unit consists of a mouldboard deep loosener with a sloping rack and a ridge maker. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. The optimum constructive scheme of combined aggregate is grounded. It was established that to provide formation of new ridges instead of existing ones on fields without stems of cotton with the required degree with minimum power consumption working surfaces of inclined deep looseners equipped with mouldboards and rippers should be turned to each other and shifted relative to each other in a longitudinal plane. The formation of ridges to the required degree with minimal energy input is ensured at a width and length of the subsoiler's chisel, respectively 5 and 20 cm, the width of the wing width 21 cm, wing length between 47 and 49 cm, minimum longitudinal spacing between subsoilers 35 cm.