Optimization of Wax Model Printing using a DLP 3D Printer for Castable Wax Resin material
Wax material can be used to make craft items as models that are printed using 3D printing. Custom and mass production processes for craft items can be carried out according to customer needs. This research aims to find the best process parameters in optimising the wax printing process as a printed m...
Gespeichert in:
Veröffentlicht in: | E3S web of conferences 2024-01, Vol.517, p.5022 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Wax material can be used to make craft items as models that are printed using 3D printing. Custom and mass production processes for craft items can be carried out according to customer needs. This research aims to find the best process parameters in optimising the wax printing process as a printed model using 3D Printing DLP technology to have the best dimensional accuracy, geometric accuracy, and surface roughness. The method used is a design of experiment with factors in the form of exposure time and layer thickness, each of which has three levels to produce the best response: dimensional accuracy, geometry, and surface roughness. The research results show that print parameters with an exposure time value of 16 seconds and a layer thickness of 0.06 are the best experiments in producing dimensional accuracy of the print results. This is indicated by the smallest shrinkage percentage value of 0.41%. Meanwhile, to obtain smooth print results with minimal defects, printing is carried out with an exposure time parameter of 14 seconds with a layer thickness of 0.06 mm. |
---|---|
ISSN: | 2267-1242 2267-1242 |
DOI: | 10.1051/e3sconf/202451705022 |