Application of high performance concrete for reconstruction

One of the sustainability aspects of the construction is a sufficient durability. In objectively justified cases, the durability is enhanced by reconstruction. To ensure economic design of the reconstruction, non-liner approaches are often applied. This paper deals with aănonlinear numerical simulation of disassembled reinforced concrete (RC) panels strengthened by an ultra-high performance concrete (UHPC) layer. Based on the prior experimental programme, simulations of four-point bending tests of the original and strengthened panels are created using software ATENA Science. Calibration of the material parameters is based on the destructive and non-destructive investigations performed in the experimental programme. The comparison of the experimental and numerical model loading curves indicates that additional mechanical testing will be needed in order to achieve an accurate numerical simulation. Although the bending test of the RC panel and the crack mouth opening displacement (CMOD) test performed on the applied UHPC beam were calibrated, the final model of the UHPC strengthened panel does not correspond completely with the experimental measurements. In this paper the possible reasons for this result are discussed.