Weak Signal Processing Methods Based on Improved HHT and Filtering Techniques for Steel Wire Rope

As one of the most important processes in steel wire rope inspection, defect signal processing is of great significance in guaranteeing safety and precision measurement. Aiming at the weak signal detection of steel wire rope with mixed strands and noise, a combined signal processing method based on...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied sciences 2022-07, Vol.12 (14), p.6969
Hauptverfasser: Liu, Shiwei, Sun, Yanhua, He, Lingsong, Kang, Yihua
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:As one of the most important processes in steel wire rope inspection, defect signal processing is of great significance in guaranteeing safety and precision measurement. Aiming at the weak signal detection of steel wire rope with mixed strands and noise, a combined signal processing method based on magnetic flux leakage testing and multi-step filtering techniques are proposed in this paper. The experiments are first introduced and performed on three typical types of steel wire rope with diameters of 28 mm, 32 mm, 45 mm, and different wire broken defects detected under liftoff distances of 13 mm and 20 mm; the acquired signals are then analyzed both in time and frequency domain. According to the weak signal characterizations, the principle of the proposed methods and algorithm are given concretely. Afterwards, comparison of signal processing results between the traditional lowpass filtering, wavelet denoising, median filtering, and the proposed method are presented. Finally, the influence factors of smoothing types and moving average span of the proposed methods are investigated. The processing results of the proposed methods are shown through short-time Fourier transform and signal-to-noise ratio analysis, which not only demonstrates the validity and feasibility of the combined methods with the highest signal to noise ratio of 90.37 dB, but also exhibits a great potential of precision defect detection and practical application in steel wire rope inspection.
ISSN:2076-3417
2076-3417
DOI:10.3390/app12146969