Continuously controllable photoconductance in freestanding BiFeO3 by the macroscopic flexoelectric effect

Flexoelectricity induced by the strain gradient is attracting much attention due to its potential applications in electronic devices. Here, by combining a tunable flexoelectric effect and the ferroelectric photovoltaic effect, we demonstrate the continuous tunability of photoconductance in BiFeO 3 films. The BiFeO 3 film epitaxially grown on SrTiO 3 is transferred to a flexible substrate by dissolving a sacrificing layer. The tunable flexoelectricity is achieved by bending the flexible substrate which induces a nonuniform lattice distortion in BiFeO 3 and thus influences the inversion asymmetry of the film. Multilevel conductance is thus realized through the coupling between flexoelectric and ferroelectric photovoltaic effect in freestanding BiFeO 3 . The strain gradient induced multilevel photoconductance shows very good reproducibility by bending the flexible BiFeO 3 device. This control strategy offers an alternative degree of freedom to tailor the physical properties of flexible devices and thus provides a compelling toolbox for flexible materials in a wide range of applications. Previous methods to generate strain gradient and flexoelectricity are limited to a localized effect or cannot be tuned continuously. Here, the authors achieve macroscale continuously controllable strain gradient in freestanding ferroelectric thin film. Multilevel photoconductance in BiFeO3 films can be achieved by coupling between the flexoelectric and ferroelectric photovoltaic effect.