Cutting Force Model of Ultrasonic Elliptical Vibration-Assisted Helical Milling of SiCp/Al Composites

SiC particle-reinforced Al metal matrix (SiCp/Al) composites are more and more widely used in the aerospace field due to their excellent properties, and the realization of high-quality drilling of SiCp/Al composites has an important impact on improving the performance of parts. In this paper, ultrasonic elliptical vibration-assisted helical milling (UEVHM) is applied to the machining of SiCp/Al composites. Firstly, the kinematic analysis of UEVHM is carried out, and then the cutting force model is established, which takes into account the interaction between particles and the cutting edge, and calculates the crushing force, pressing force, and debonding force of the particles. Finally, the UEVHM tests are conducted to verify the accuracy of the model and to analyze the influence of process parameters on the cutting force. It was found that the radial and axial forces decreased by 34% and 39%, respectively, when the spindle speed was increased from 2000 r/min to 10,000 r/min; the radial and axial forces increased by 200% and 172%, respectively, when the pitch increased from 0.1 mm to 0.4 mm; and the radial and axial forces increased by 29% and 69%, respectively, when the rotational speed increased from 30 r/min to 70 r/min. The maximum error between the cutting force model and the experimental values is 19.06%, which has a good accuracy. The research content of this paper can provide some guidance for the high-quality hole-making of SiCp/Al composites.