Use of spray nozzles to recover dissolved methane from an Upflow Anaerobic Sludge Blanket (UASB) reactor effluent

Methane is a powerful greenhouse gas and a source of energy. Recovering this gas means lower greenhouse gas emission and potential reduction of energetic costs. The lack of full-scale results, the use of different methodologies to detect dissolved methane (d-CH ) and the fact that no process to remove d-CH from anaerobic effluents is energetically or economically viable at full-scale urged a different approach to the problem. To avoid methodological interference and facilitate comparison of results the Standard Test Method number D8028-17 published by ASTM International can be used to determine d-CH . The use of real anaerobic reactor effluent also helps results to be compared. In this study, 80 samples from a full-scale anaerobic reactor showed an average concentration of dissolved methane of 14.9 mg·L , meaning an emission of 229 kg of CO eq·h and an average of 113.5 kW wasted. Using spray nozzles, an alternative to the methods being researched, the average methane recovery was 11.5 mg·L of CH , an efficiency of 81.6%, meaning 177 kg of CO eq·h emissions avoided and 87.9 kW of recoverable energy.