Boosting the grain refinement of commercial Al alloys by compound addition of Sc

For decades, Al–Ti–B has been widely used for refining commercial Al alloys. However, the addition of Al–Ti–B master alloys to recycled Al alloys suffers from Si-poisoning and cannot achieve desired refinement and thus final strength-ductility. In this study, a novel grain refiner made of Al–Ti–B-Sc has been developed and its application in refining recycled Al–Si–Cu alloys has been quantified using X-ray computed tomography (XCT). It has been found that the new Al–5Ti–1B-0.8Sc master alloy exceed the performance of Al–5Ti–1B in three aspects: (1) formation of Al3(Sc,Ti) heterogeneous nucleation particles other than Al3Ti; (2) dispersing TiB2 by forming TiB2/Al3(Sc,Ti) clusters and increasing Al melt viscosity; (3) reducing the specific surface area of Al3Ti to improve its high-temperature stability. Surprisingly, the compound addition of Sc has been found to further reduce the grain and Si particle size due to accelerated kinetics of α-Al nucleation and diminished Si poisoning. Therefore, this study proposes not only a new master alloy but also a new grain refinement method, which can effectively increase the tensile strength and elongation of recycled Al alloys up to 433.2 ± 10.5 MPa and 3.0 ± 0.1 %, respectively.