Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements

A key challenge for solid-state-batteries development is to design electrode-electrolyte interfaces that combine (electro)chemical and mechanical stability with facile Li-ion transport. However, while the solid-electrolyte/electrode interfacial area should be maximized to facilitate the transport of high electrical currents on the one hand, on the other hand, this area should be minimized to reduce the parasitic interfacial reactions and promote the overall cell stability. To improve these aspects simultaneously, we report the use of an interfacial inorganic coating and the study of its impact on the local Li-ion transport over the grain boundaries. Via exchange-NMR measurements, we quantify the equilibrium between the various phases present at the interface between an S-based positive electrode and an inorganic solid-electrolyte. We also demonstrate the beneficial effect of the LiI coating on the all-solid-state cell performances, which leads to efficient sulfur activation and prevention of solid-electrolyte decomposition. Finally, we report 200 cycles with a stable capacity of around 600 mAh g −1 at 0.264 mA cm −2 for a full lab-scale cell comprising of LiI-coated Li 2 S-based cathode, Li-In alloy anode and Li 6 PS 5 Cl solid electrolyte. Development of all-solid-state batteries requires stable solid electrolyte-electrode interfaces. Here, via exchange-NMR measurements, the authors investigate the positive electrode-solid electrolyte interface, revealing the impact of an inorganic coating on the Li-ion transport properties.