Study on the Properties of Compound Surfactants with PO Groups

The compound surfactant system has considerable development prospects for improving oil recovery. A synergistic effect can be achieved through the orderly arrangement of the two surfactants on the interface, which can make up for the performance defects of a single surfactant. In this paper, the effects of the number of propylene oxides (PO) in composite surfactants on interfacial tension and emulsion stability were systematically studied. The results showed that the solubility of composite surfactants was significantly improved under high-salinity conditions by adding anionic–nonionic surfactants to a single anionic surfactant. The interfacial tension of composite surfactants shows a V-shaped change of first decreasing and then increasing with the increase in PO groups. As the number of PO groups increases, the emulsion first increases and then decreases. Among the series of composite surfactants, LBAS/C12PO10S has the lowest interfacial tension, reaching the order of 10−3 mN/m, and the emulsion formed by it exhibits superior stability. This indicates that the synergistic effect of the two surfactants can be improved by adjusting the number of PO groups. Furthermore, the LBAS/C12PO10S composite system can be mixed with crude oil to form Winsor III microemulsion, which has great potential for application in enhanced oil recovery via chemical flooding.