Extremely Polysubstituted Magnetic Material Based on Magnetoplumbite with a Hexagonal Structure: Synthesis, Structure, Properties, Prospects

Crystalline high-entropy single-phase products with a magnetoplumbite structure with grains in the μm range were obtained using solid-state sintering. The synthesis temperature was up to 1400 °C. The morphology, chemical composition, crystal structure, magnetic, and electrodynamic properties were st...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Nanomaterials (Basel, Switzerland) Switzerland), 2019-04, Vol.9 (4), p.559
Hauptverfasser: Vinnik, Denis A, Zhivulin, Vladimir E, Trofimov, Evgeny A, Starikov, Andrey Y, Zherebtsov, Dmitry A, Zaitseva, Olga V, Gudkova, Svetlana A, Taskaev, Sergey V, Klygach, Denis S, Vakhitov, Maxim G, Sander, Elena E, Sherstyuk, Darya P, Trukhanov, Alexey V
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Crystalline high-entropy single-phase products with a magnetoplumbite structure with grains in the μm range were obtained using solid-state sintering. The synthesis temperature was up to 1400 °C. The morphology, chemical composition, crystal structure, magnetic, and electrodynamic properties were studied and compared with pure barium hexaferrite BaFe O matrix. The polysubstituted high-entropy single-phase product contains five doping elements at a high concentration level. According to the EDX data, the new compound has a formula of Ba(Fe₆Ga In Ti Cr Co )O . The calculated cell parameter values were = 5.9253(5) Å, = 23.5257(22) Å, and = 715.32(9) ų. The increase in the unit cell for the substituted sample was expected due to the different ionic radius of Ti/In/Ga/Cr/Co compared with Fe . The electrodynamic measurements were performed. The dielectric and magnetic permeabilities were stable in the frequency range from 2 to 12 GHz. In this frequency range, the dielectric and magnetic losses were -0.2/0.2. Due to these electrodynamic parameters, this material can be used in the design of microwave strip devices.
ISSN:2079-4991
2079-4991
DOI:10.3390/nano9040559