The Influence of Laser Remelting Parameters on the Surface Quality of Copper

In order to improve the surface quality of copper after laser remelting, this article took laser frequency, pulse width, and energy density as the research objects and used scanning electron microscopy (SEM), a laser confocal three-dimensional measurement instrument, hardness tester, and friction an...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Micromachines (Basel) 2024-07, Vol.15 (7), p.927
Hauptverfasser: Li, Hengzheng, Chen, Yang, Chen, Shuai, Liu, Yan, Liu, Conghu
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In order to improve the surface quality of copper after laser remelting, this article took laser frequency, pulse width, and energy density as the research objects and used scanning electron microscopy (SEM), a laser confocal three-dimensional measurement instrument, hardness tester, and friction and wear measurement instrument to study the surface morphology, surface roughness, microhardness, and wear resistance of copper, respectively. The results indicate that the frequency, pulse width, and energy density of laser remelting could directly affect the surface quality of the sample, but the influence of frequency and pulse width was more significant. When the laser remelting frequency was 10 Hz, the pulse width was 10 ms, and the energy density was 132.69 J/mm , the sample exhibited good surface morphology, roughness, and wear resistance. The relevant research in this article can provide a good reference for the laser surface treatment of copper-based materials.
ISSN:2072-666X
2072-666X
DOI:10.3390/mi15070927