The Development of A Universal Transformer Housing of the Unit Transformer Substation 6-10 / 0.4 KV

The company group of the PJSC “ROSSETI” pays great attention to reducing occupational hazard at the facilities of the power grid complex. The analysis of the accidents in the branch of PJSC “IGDC of the Center”– “Orelenergo” revealed that transformer housings installed at the mast-type transformer substations 6-10 / 0.4 kV can’t fully provide the required safety level as they can be slightly raised even without using a special tool, and therefore one can stick his hands or some objects to the current-carrying parts of the transformer substation. According to the statistics of the damages at the mast-type transformer substations 6-10 / 0.4 kV various small animals and birds can enter the electrical installation through small slits between the housing and the transformer, which will lead to different emergency situations. To prevent the aforementioned negative consequences, a universal transformer housing was developed for a mast-type unit transformer substation (UTS) 6-10 / 0.4 kV. The offered design of the housing is universal, since it can be used for the transformers of various capacities; for its manufacture tools and materials with different characteristics can be used. At the same time, the installation of the developed housing will allow power grid companies to reduce occupational hazard, reduce the undersupply of electricity and increase the reliability of power supply to the agricultural consumers. The technical solution presented in the article can be applied for the mast-type UTS 6-10 / 0.4 kV in the post-Soviet countries.