Investigation on the Temperature Distribution Uniformity of an Extrusion-Based 3D Print Head and Its Temperature Control Strategy

Extrusion-based 3D printing for thermoplastic polymers manifests potential for the fabrication of biocompatible and biodegradable scaffolds. However, the uncontrollable shape of printed filaments usually negatively impacts on the printing processes. Non-uniform temperature in the print head is a pri...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Pharmaceutics 2022-10, Vol.14 (10), p.2108
Hauptverfasser: Gao, Qiang, Yu, Kaicheng, Chen, Fangzheng, Lu, Lihua, Zhang, Peng
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Extrusion-based 3D printing for thermoplastic polymers manifests potential for the fabrication of biocompatible and biodegradable scaffolds. However, the uncontrollable shape of printed filaments usually negatively impacts on the printing processes. Non-uniform temperature in the print head is a primary cause of inaccuracy in the diameter of filaments formed during the process of extruding thermoplastic polymers. Therefore, the temperature distribution inside the print head must be controlled accurately. This study developed a novel print head configuration with two groups of controllable heat sources for extrusion-based printing of thermoplastic polymers. Subsequently, a numerical thermal analysis based on the finite element method (FEM) was conducted to investigate the temperature field in the print head during the heating process. Moreover, a temperature control strategy is proposed under which the temperature distribution of the print head can be regulated. The temperature uniformity can be improved with the proposed temperature control strategy. Lastly, groups of printing trials were implemented, and the printed filaments showed excellent uniformity of diameter when temperature distribution uniformity was controlled in the print head.
ISSN:1999-4923
1999-4923
DOI:10.3390/pharmaceutics14102108