Study on the Mechanical Properties and Calculation Method of the Bearing Capacity of Concrete-Filled Steel Pipes under Axial Pressure Load

Circular steel pipe concrete can give full play to the combination of steel pipes and concrete, resulting in an improvement in the steel pipe’s concrete bearing capacity and ductility. In this study, the axial compression load capacities of nine steel pipe concrete columns, including one traditional steel pipe concrete column and eight steel pipe self-stressed concrete columns, were analyzed using an axial pressure test. The damage patterns and stress–strain curves of all the specimens under axial compression load were analyzed, and a comparison analysis was made between the test results of the different specimens. The test results show that the longitudinal expansion displacement of concrete increases with the increase in the expansion agent content. The greater the self-stress, the higher the bearing capacity of steel-tube concrete columns under axial compressive load within a certain range of the expansion agent, indicating that self-stress can increase the bearing capacity of steel-tube concrete columns under axial compressive load, but the effect of the magnitude of the self-stress on the damage pattern of the specimens is limited. The damage patterns of all the specimens were bulging in the center and concave at both ends. In addition, the existing theoretical calculation method of the bearing capacity of steel pipe concrete columns is modified, and a theoretical calculation method applicable to steel pipe self-stressed concrete columns is proposed to simplify the calculation method of the bearing capacity of steel pipe self-stressed concrete columns, which provides a basis for decision-making in practical engineering.