AlxCoCrCuFeNi (X = 0, 0.8) high entropy alloys fabricated by laser powder bed fusion

The AlxCoCrCuFeNi (x = 0, 0.8) high entropy alloys (HEAs) were prepared by laser powder bed fusion (LPBF), and the effects of volumetric energy density (VED) and heat treatment on microstructures and mechanical properties of HEAs were investigated. The results show that the CoCrCuFeNi HEA has a single FCC phase structure and exhibits good ductility. Its yield strength is relatively low, being 520 MPa. After the alloy composition was adjusted from CoCrCuFeNi to Al0.8CoCrCuFeNi, the HEA changed from FCC single-phase to FCC + BCC dual-phase structure and the hardness and compressive properties were significantly improved. Among them, the Al0.8CoCrCuFeNi HEA prepared with the VED of 167 J/mm3 has the best mechanical properties, with a compressive yield strength of 652 MPa and good plasticity. After annealing at 600°C and 900°C for 1 h, the mechanical properties of HEAs are significantly improved. In particular, the microhardness and compressive yield strength of the Al0.8CoCrCuFeNi HEA annealed at 600°C for 1 h are 378 HV and 810 MPa, respectively. The coordinated deformation between FCC and BCC domains, back stress strengthening, solid solution strengthening and precipitation strengthening after heat treatment make the Al0.8CoCrCuFeNi HEA achieve a balance of high strength and good ductility.