Improvement of salt rejection efficiency of cellulose acetate membrane through modification by poly(amidoamine) dendrimer-functionalized graphene oxide

In this work, the grafting method using graphene oxide (GO) - poly(amidoamine) dendrimer (PAMAM) nanocomposite as filler for the functionalization of cellulose acetate membrane is reported. Here, cellulose acetate membrane incorporated by nanocomposite in the polymer solution was prepared through the phase inversion technique. The effect of embedding GO-PAMAM on the characterization properties and rejection performance was studied. The results of zeta potential, thermogravimetric analysis (TGA), contact angle measurements, Fourier-transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM) established successful modification. Based on the data found, adding the filler improves membrane properties. Loading of 1.00 wt% of GO/PAMAM was found to be the optimized amount of the filler in the membrane processing with the highest porosity (74%), antifouling behavior (88%), reversible fouling ratio (45.71%), and the least contact angle (∼40°). Hence, the rejection and permeability tests of the prepared membrane were examined by Na2SO4 (98.40%), NaCl (52%), and MgCl2 (57%) solutions through a lab dead-end cell. According to the results, the value of salt rejection established more permeability and rejection than neat cellulose acetate membrane.