Coupling Dynamics Study on Multi-Body Separation Process of Underwater Vehicles
Based on the Newton-Euler method, a coupling rigid-body dynamics model of a Trans-Medium Vehicle (TMV) separating from an Unmanned Underwater Vehicle (UUV) has been established. The modeling is based on the “holistic method” and “Kane” ideas respectively, so that most of the equations can be derived...
Gespeichert in:
Veröffentlicht in: | Drones (Basel) 2024-10, Vol.8 (10), p.533 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Based on the Newton-Euler method, a coupling rigid-body dynamics model of a Trans-Medium Vehicle (TMV) separating from an Unmanned Underwater Vehicle (UUV) has been established. The modeling is based on the “holistic method” and “Kane” ideas respectively, so that most of the equations can be derived without considering the internal forces between the two bodies. The separation propulsion force, which is an internal force, only appears in the relative glide dynamics equation of the TMV along the axis of the separation tube that is installed on the UUV. This greatly reduces the workload of modeling and derivation. The UUV works entirely underwater, while the hydrodynamic shape of the TMV changes continuously during the process of the TMV separating from the UUV. Therefore, accurate hydrodynamic calculations for the UUV and TMV are the basis of numerical resolution for the two rigid bodies’ coupling dynamics model in water. A large number of numerical simulations was conducted using CFD methods to investigate the hydrodynamic performance of the UUV and TMV under various conditions. These simulations aim to establish a hydrodynamic database, and accurate hydrodynamic models were developed through fitting methods and online interpolation. In the process of solving the coupling dynamics of two bodies, the hydrodynamic model is used to calculate the hydrodynamic force experienced by the UUV and TMV. This balances the accuracy and efficiency of a numerical simulation. Finally, numerous simulations and comparative analyses were conducted under various operational conditions and separation parameters. The simulation results indicate that the impact of TMV separation on the motion state of the UUV becomes more prominent with smaller UUV to TMV mass ratios or deeper TMV separation depths. This effect can further influence the stability control of the UUV. The coupling rigid body dynamics analysis method established in this paper provides a fast and effective prediction method for use during the scheme design and separation safety evaluation phases of creating UUV-TMV systems. |
---|---|
ISSN: | 2504-446X 2504-446X |
DOI: | 10.3390/drones8100533 |