Characteristics of CALIOP attenuated backscatter noise: implication for cloud/aerosol detection

A research algorithm is developed for noise evaluation and feature detection of the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) Level 1 (L1) backscatter data with an emphasis on cloud/aerosol features in the upper troposphere and lower stratosphere (UT/LS). CALIOP measurement noise of...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Atmospheric chemistry and physics 2011-03, Vol.11 (6), p.2641-2654
Hauptverfasser: Wu, D L, Chae, J H, Lambert, A, Zhang, F F
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A research algorithm is developed for noise evaluation and feature detection of the CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) Level 1 (L1) backscatter data with an emphasis on cloud/aerosol features in the upper troposphere and lower stratosphere (UT/LS). CALIOP measurement noise of the version v2.01 and v2.02 L1 backscatter data aggregated to (5 km) horizontal resolution is analyzed with two approaches in this study. One is to compare the observed and modeled molecular scatter profiles by scaling the modeled profile (with a fitted scaling factor α) to the observed clear-sky backscatter profiles. This scaling α value is sensitive to errors in the calibrated backscatter and the atmospheric model used. Most of the nighttime 532-nm α values are close to unity, as expected, but an abrupt drop occurred in October 2008 in the daytime 532-nm α, which is likely indicative of a problem in the v2.02 daytime calibrated data. The 1064-nm night α is generally close to 2 while its day α is ~3. The other approach to evaluate the lidar measurement noise is to use the calibrated lidar backscatter data at altitudes above 19 km. With this method, the 532-nm and 1064-nm measurement noises are analyzed and characterized individually for each profile in terms of the mean (μ) and standard deviation (σ), showing larger σ values in general over landmasses or bright surfaces during day and in radiation-hard regions during night. A significant increasing trend is evident in the nighttime 1064-nm σ, which is likely responsible for the increasing difference between the feature occurrence frequencies (532-nm vs. 1064-nm) derived from this study. For feature detection with the research algorithm, we apply a σ–based method to the aggregated L1 data. The derived morphology of feature occurrence frequency is in general agreement with that obtained from the Level 2 (L2) 05 km_CLAY+05 km_ALAY products at 5 km horizontal resolution. Finally, a normalized probability density function (PDF) method is employed to evaluate the day-night backscatter data in which noise levels are largely different. CALIOP observations reveal a higher probability of daytime cloud/aerosol occurrence than nighttime in the tropical UT/LS region for 532-nm total backscatters >0.01 km−1 sr−1.
ISSN:1680-7324
1680-7316
1680-7324
DOI:10.5194/acp-11-2641-2011