Experimental Assessment of Mechanical Properties of Corroded Low–Alloy Structural Steel

This study investigates the mechanical properties of corroded Q355B structural steel subjected to a simulated marine atmosphere and an industrial atmosphere. The micro-morphology of corroded steel in two different environments was analyzed by SEM (scanning electron microscopy). Tension tests were pe...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Buildings (Basel) 2024-05, Vol.14 (5), p.1457
Hauptverfasser: Chen, Yao, Ma, Boshi, Lu, Ruihua
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This study investigates the mechanical properties of corroded Q355B structural steel subjected to a simulated marine atmosphere and an industrial atmosphere. The micro-morphology of corroded steel in two different environments was analyzed by SEM (scanning electron microscopy). Tension tests were performed to determine the degradation laws of the mechanical properties of corroded steel, including its yield strength, ultimate strength, elastic modulus, ultimate strain and elongation after fracture. The test results indicate that the elongation after fracture of the steel is the most severely deteriorated property after corrosion. The recommended empirical formula for limiting the maximum corrosion rate is established. It is found that when the initial elongation is 30%, the maximum allowable corrosion rate is 19.2%. Based on the achieved results, a simplified time-dependent stress–strain model of Q355B structural steel is established considering the coupling effects of corrosive environments and applied stress, which is also evaluated using relevant research. In addition, axial compression tests were conducted on corroded square stud columns to verify the effectiveness of the established model. It is indicated that the model can be used for fitness-for-purpose analyses in structural integrity assessments.
ISSN:2075-5309
2075-5309
DOI:10.3390/buildings14051457