Optimization of Redundant Degrees of Freedom in Robotic Flat-End Milling Based on Dynamic Response

With the advantages of large working space, low cost and more flexibility, industrial robots have become an important carrier in intelligent manufacturing. Due to the low rigidity of robotic milling systems, cutting vibrations are inevitable and have a significant impact on surface quality and machi...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied sciences 2024-03, Vol.14 (5), p.1877
Hauptverfasser: Liu, Jinyu, Zhao, Yiyang, Niu, Yuqin, Cao, Jiabin, Zhang, Lin, Zhao, Yanzheng
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:With the advantages of large working space, low cost and more flexibility, industrial robots have become an important carrier in intelligent manufacturing. Due to the low rigidity of robotic milling systems, cutting vibrations are inevitable and have a significant impact on surface quality and machining accuracy. To improve the machining performance of the robot, a posture optimization approach based on the dynamic response index is proposed, which combines posture-dependent dynamic characteristics with surface quality for robotic milling. First, modal tests are conducted at sampled points to estimate the posture-dependent dynamic parameters of the robotic milling system. The modal parameters at the unsampled points are further predicted using the inverse distance weighted method. By combining posture-independent modal parameters with calibrating the cutting forces, a dynamic model of a robotic milling system is established and solved with a semi-discretization method. A dynamic response index is then introduced, calculated based on the extraction of the vibration signal peaks. The optimization model is validated through milling experiments, demonstrating that optimizing redundant angles significantly enhances milling stability and quality.
ISSN:2076-3417
2076-3417
DOI:10.3390/app14051877